0 Items
  1. Home
  2. Components
  3. Forks
  4. Steer Tube insert for carbon fork - 23.8mm Diameter

Steer Tube insert for carbon fork - 23.8mm Diameter

2 Review(s) Write a Review
Your Price: $35.00
Steer Tube insert for carbon fork - 23.8mm Diameter
Availability: In Stock
Feature: Diameter is 23.8mm

Send to:

*We'll ask for shipping info at checkout
CNC-machined aluminum extra-long glue-in insert for carbon forks with integrated top cap bolt anchor threads. This insert replaces the standard expansion plug and adds extra strength to the steering tube. It is 123mm long and 23.8mm in diameter, so it supports almost the top five inches of the steering tube and provides greater strength under the spacer stack. This was designed for ENVE Forks, so they will work on any Enve carbon road fork except the older 1.0 model which has a thinner wall steering tube. It will work on any carbon fork with the appropriate inside diameter. You must measure your own fork's steering tube ID. We don't have data on all forks, so we don't know if it will work on your fork unless you measure. Epoxy is not included. We recommend using a two part epoxy such J-B Weld® Plastic Bonder

**NOTE: Do not over torque the top cap bolt. Top cap must be tightened to a minimum torque to remove headset play, but no more. This is about 1 or 2 nm. Only tighten the top cap bolt while the stem pinch bolts are loose. Failure to follow the instructions will result in breaking the epoxy bond and you will have to start over. 

*Watch the video for installation instructions. 

Recently Viewed Items

worldwide shipping


Ambassador Program

Submit a Service Ticket