Zinn Split30 Custom Cranks
The Zinn Split30 cranks are a new 30mm integrated spindle crankset perfect for road and gravel riding.
New Features
Compatibility
Split30 road bike cranks are compatible with a number of different drivetrain options. The cranks use a 30mm spindle which works with any 30mm inside diameter bottom bracket. They can mount to any bike with a standard 68mm BB shell with English or Italian threads. They are available as 110bcd 5-bolt pattern for chainring compatibility. The 110bcd cranks are not compatible with Campagnolo 110bcd chainrings, but any other 110bcd rings should work fine.
Split-30 Crankset Installing Instruction
1-install bottom brackets.
2-install right arm first.
3-install left arm with spacer and spindle adjusting back out all the way out. A- line the arms so that they are straight in line of each other.
4-install 10mm thread Binder bolt with Blue Loctitle or anti seize grease on the threads.
5-tighten Binder bolt using 12mm hex head socket and torque to 36 to 40 FOOT lbs., this a must!!
6-adjust the spindle adjusting ring so there is little to NO side play.
7-once adjusted, tighten the bolt on the adjusting ring using 2mm Allen key.
8-use pedal washer when putting pedals on using anti seize grease on the pedal threads.