Compatible with the following Bottom Bracket Standards:
- Specialized Carbon OSBB. May need additional cup spacers if BB shell width is 61mm.
Compatible with the following cranksets:
- Shimano HollowTech II
- FSA MegaExo
- Rotor 3D, Agilis
- RaceFace EXI
- RaceFace X-Type
- Do not install bottom bracket with the two bolts positioned above the bearing. Some carbon frames do not have proper internal support for the bolts to properly tighten to spec. As a result, the cups will not stay tight in the frame, and at worst, your frame may crack.
- 5mm Allen Wrench (ALLEN-WRENCH)
- Pin Spanner / Lockring Wrench (TOOL-SPAN)
- Torque Wrench